Fast Corrugated Carton Machine 3 5 7 Layers Clapboard Production Line

Corrugated Carton Clapboard 3 5 7 Layers Production Line

Hydraulic shaftless mill roll stand:

★ adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.

★brake adjustable adopts multipoint braking system.

★ every stand matched two sets paper car , and they can paper on the both sides at the same time.

Paper trolley, track:

★ the whole track buried,The main frame of the 14th Channel steel with ¢ 20mm cold drawn welded round,length of track 6000mm.

★ each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.

Top(core)paper preheater:

★ In accordance with national standard category pressure vessel,and with the pressure vessel certificate.

★ The roll surface after precision grinding, fine grinding and hard chromium plating processing,surface friction,durable.

★ electric adjustable angle, angle can rotate in the range of 360°,and adjust the paper preheat area

Single surface adsorption machine:

★ The use of suction hood structure, with high - pressure strong fan. The air suction is equipped with sound attenuation device, and the air source and electrical control are concentrated in the same operating cabinet. The distance from the main machine is not less than 1.5m.

★ The operating side is fully closed and covered.Machine base and wallboard cast iron structure, wallboard thickness of 130mm. Universal joint drive.

★ The corrugated roller material is made of 48 crmo alloy steel, after tempering, medium frequency quenching, surface polishing, corrugated roller diameter ¢293 mm, surface hardness above HRC60 degrees (optional, tungsten carbide roll and surface hardness HV1200). Key parts of the tile roller, pressure roller bearings using wafangdian high temperature bearings.

★ The pressure roller ¢320 mm, surface grinding and chrome plated treatment; The cylinder is controlled to move up and down, and the material is medium carbon steel no.45, tempering and tempering treatment (with buffer device).

★ The pneumatic control to glue back glue, glue spreader with 25 ￠215 mm diameter surface after polishing line after pit type checker processing hard chromium plating processing, scraping the rubber roller surface after grinding hard chromium plating processing.

★ Raw materials of corrugated roller and pressure roller are provided by zhongyuan special steel co., LTD. The corrugated roller has a top middle height of 0.15mm on one side and a middle height of 0.075mm on the other side. Add limit device.